Detailed Information for Lysol Power White & Shine-Multi-Purpose Cleaner With Bleach
SDS ID: 0017
SDS Sheets

Supplier

Manufacturer

Language

Revision Date

Classification

Document Flags




Document Flags Legend

Icon Description

GHS Document

WHMIS Document
GHS


Signal Word
Warning


GHS Hazard Categories
CORROSIVE TO METALS - Category 1
SKIN CORROSION/IRRITATION - Category 2
EYE DAMAGE/IRRITATION - Category 2B
SENSITIZATION - SKIN - Category 1


GHS Hazard Statements
Causes eye irritation
Causes skin irritation
May be corrosive to metals
May cause an allergic skin reaction


GHS Precautionary Statements

Prevention: Keep only in original container.; Wash hands thoroughly after handling.; Avoid breathing vapor; Contaminated work clothing should not be allowed out of the workplace.; Wear protective gloves. Wear eye or face protection.

Response: Absorb spillage to prevent material damage.; If on skin: Wash with plenty of soap and water.; Take off contaminated clothing.; If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; If eye irritation persists: Get medical advice/attention.; Wash contaminated clothing before reuse.; If skin irritation or rash occurs: Get medical attention.

Storage: Store in corrosive resistant container with a resistant inner liner.

Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations.

General: Read label before use; Keep out of reach of children; If medical advice is needed, have product container or label at hand

PPE

Gloves

Goggles

Respirator

Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated.
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.
Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: Chemical splash goggles.
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
First Aid
See SDS
Product Details
SDSID
0017
Product Name
Lysol Power White & Shine-Multi-Purpose Cleaner With Bleach
Synonyms
N/A
Internal Stock Numbers
Manufacturer Stock Numbers
Specific Gravity
1
Density lbs/Gal
Not Given
Physical State
Not Given
Pounds per Cubic Foot
Not Given
Odor
Not Given
Odor Threshold
Not Given
Solubility
Not Given
Partition coefficient Water/n-octanol
Not Given
Viscosity
Not Given
Color
Not Given
Flash Point
Not Given
Flash Point Method
Not Given
Boiling Point
Not Given
Boiling Range
Not Given
Melting Point
Not Given
Evaporation Rate
Not Given
Decomposition Temperature
Not Given
Auto-ignition Temperature
Not Given
LEL
Not Given
UEL
Not Given
Vapor Pressure
Not Given
Vapor Density
Not Given
pH
Not Given
Flammability
Not Given
VOC%
Not Given
Percent Volaitile
Not Given
Chemical Ingredients
Ingredient

CAS Number

Weight %

Sodium Hydroxide 1310-73-2 0.25% - Max
Sodium Hypochlorite, Solution 7681-52-9 1% - 2.5%

Waste Codes
No Records Available