Product Hazard Summary


Product Name SDS ID Manufacturer
Loctite 567 Thread Sealant (Loctite 567 PST Pipe Sealan) (56747) 0015 Henkel Corporation

Synonym Manufacturer Phone
Loctite 567 Thread Sealant known as Loctite 567 PST Pipe ... (56747); Loctite 567 PST Pipe Sealant With PTFE (56747) (860) 424-9300

Signal Word
Warning



GHS Hazard Catagories
SKIN CORROSION/IRRITATION - Category 2
EYE DAMAGE/IRRITATION - Category 2B
SENSITIZATION - SKIN - Category 1


GHS Hazard Statements
Causes eye irritation
Causes skin irritation
May cause an allergic skin reaction


GHS Precautionary Statements

Prevention: Wash affected area thoroughly after handling; Wear protective gloves.; Avoid breathing dust or fumes.; Contaminated work clothing must not be allowed out of the workplace.

Response: If on skin: Wash with plenty of water; Take off contaminated clothing.; If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; If eye irritation persists: Get medical attention.; If skin irritation or rash occurs: Get medical attention.

Storage: N/A

Disposal: Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

PPE

Gloves

Goggles

Apron

Respirator

Health Hazards:
No Hazard Reproductive Toxin
Toxic Highly Toxic Corrosive
Carcinogen Sensitizer Irritant
Acute Chronic

Physical Hazards:
No Physical Hazard Combustible Liquid
Explosive Flammable Water Reactive
Oxidizer Pyophoric Unstable/Reactive
Compressed Gas Organic Peroxide

Routes of Entry:
Inhalation Skin or Eye Contact
Ingestion Skin Absorption

Target Organs:
Lungs Skin Eyes
Heart Blood Blood (Effects)
Kidney Liver Prostate
Bone Mutagen Teratogen
Central Nervous System Autonomic Nervous System
Cardiovascular System Respiratory System
Mucous Membranes






PPE Phrase:
Eye/Face Protection: Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists. Safety showers and eye wash stations should be available.
Skin Protection: Neoprene, Butyl-rubber, or nitrile-rubber gloves. Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.
Engineering Controls: Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.
Respiratory Protection: Use a NIOSH approved supplied air respirator with an organic cartridge if the potential to exceed established exposure limits exists. If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a NIOSH approved respirator must be used.