Product Hazard Summary


Product Name SDS ID Manufacturer
Jetweld LH-70 0012 The Lincoln Electric Company

Synonym Manufacturer Phone
N/A (216) 481-8100

Signal Word




GHS Hazard Catagories
N/A


GHS Hazard Statements
N/A


GHS Precautionary Statements

Prevention: N/A

Response: N/A

Storage: N/A

Disposal: N/A

PPE

Gloves

Goggles

Apron

Face Shield

Respirator

Health Hazards:
No Hazard Reproductive Toxin
Toxic Highly Toxic Corrosive
Carcinogen Sensitizer Irritant
Acute Chronic

Physical Hazards:
No Physical Hazard Combustible Liquid
Explosive Flammable Water Reactive
Oxidizer Pyophoric Unstable/Reactive
Compressed Gas Organic Peroxide

Routes of Entry:
Inhalation Skin or Eye Contact
Ingestion Skin Absorption

Target Organs:
Lungs Skin Eyes
Heart Blood Blood (Effects)
Kidney Liver Prostate
Bone Mutagen Teratogen
Central Nervous System Autonomic Nervous System
Cardiovascular System Respiratory System
Mucous Membranes






PPE Phrase:
Appropriate Engineering Controls: Ventilation: Use enough ventilation, local exhaust at the arc, or both to keep the fumes and gases from the worker's breathing zone and the general area. Train the welder to keep his head out of the fumes. Keep exposure as low as possible.
Hand Protection: Wear protective gloves. Suitable gloves can be recommended by the glove supplier.
Hygiene Measures: Do not eat, drink or smoke when using the product. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Determine the composition and quantity of fumes and gases to which workers are exposed by taking an air sample from inside the welder's helmet if worn or in the worker's breathing zone. Improve ventilation if exposures are not below limits. See ANSI/AWS F1.1, F1.2, F1.3 and F1.5, available from the American Welding Society, www.aws.org.
Other: Protective Clothing: Wear hand, head, and body protection which help to prevent injury from radiation, sparks and electrical shock. See Z49.1. At a minimum this includes welder's gloves and a protective face shield, and may include arm protectors, aprons, hats, shoulder protection, as well as dark substantial clothing. Wear dry gloves free of holes or split seams. Train the welder not to permit electrically live parts or electrodes to contact skin . . . or clothing or gloves if they are wet. Insulate yourself from the work piece and ground using dry plywood, rubber mats or other dry insulation.
Eye/Face Protection: Wear helmet or use face shield with filter lens shade number 12 or darker for open arc processes or follow the recommendations as specified in ANSI Z49.1, Section 4, based on your process and settings. No specific lens shade recommendation for submerged arc or electroslag processes. Shield others by providing appropriate screens and flash goggles.
Respiratory Protection: Keep your head out of fumes. Use enough ventilation and local exhaust to keep fumes and gases from your breathing zone and the general area. An approved respirator should be used unless exposure assessments are below applicable exposure limits.