Product Hazard Summary


Product Name SDS ID Manufacturer
Ferric Nitrate (F2530) 0009 Science Stuff, Inc.

Synonym Manufacturer Phone
N/A (800) 424-9300

Signal Word




GHS Hazard Catagories
N/A


GHS Hazard Statements
N/A


GHS Precautionary Statements

Prevention: N/A

Response: N/A

Storage: N/A

Disposal: N/A

PPE

Gloves

Respirator

Health Hazards:
No Hazard Reproductive Toxin
Toxic Highly Toxic Corrosive
Carcinogen Sensitizer Irritant
Acute Chronic

Physical Hazards:
No Physical Hazard Combustible Liquid
Explosive Flammable Water Reactive
Oxidizer Pyophoric Unstable/Reactive
Compressed Gas Organic Peroxide

Routes of Entry:
Inhalation Skin or Eye Contact
Ingestion Skin Absorption

Target Organs:
Lungs Skin Eyes
Heart Blood Blood (Effects)
Kidney Liver Prostate
Bone Mutagen Teratogen
Central Nervous System Autonomic Nervous System
Cardiovascular System Respiratory System
Mucous Membranes


HMIS:






PPE Phrase:
Protective Gloves: NIOSH Approved Gloves.
Engineering Measurers: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits.
Other Protective Equipment: Wear appropriate clothing to prevent skin exposure.
Hands: Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Recommended: Nitrile rubber.
Environmental Exposure Controls: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Respiratory Protection: NIOSH/MSHA-approved respirator.
Eye Protection: Safety Glasses w/Side Shields.
Respiratory: Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Hygiene Measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking, and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.
Eyes: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. Recommended: Safety glasses with side-shields,
Ventilation: Local Exhaust: No Mechanical: Yes
Skin: Personal protective equipment for the body should be selected based on the task being performed and risks involved and should be approved by a specialist before handling this product. Body Recommended: Lab coat.