Product Summary Information
Product name
Loctite 567 Thread Sealant (Loctite 567 PST Pipe Sealan) (56747)
Signal Word
Warning
SDS ID
0015

Manufacturer
Henkel Corporation
One Henkel Way
Rocky Hill, CT
06067
U.S.A.

Manufacturer Phone
(860) 424-9300


GHS Hazard Categories
SKIN CORROSION/IRRITATION - Category 2
EYE DAMAGE/IRRITATION - Category 2B
SENSITIZATION - SKIN - Category 1


GHS Hazard Statements
Causes eye irritation
Causes skin irritation
May cause an allergic skin reaction


GHS Precautionary Statements

Prevention: Wash affected area thoroughly after handling; Wear protective gloves.; Avoid breathing dust or fumes.; Contaminated work clothing must not be allowed out of the workplace.

Response: If on skin: Wash with plenty of water; Take off contaminated clothing.; If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; If eye irritation persists: Get medical attention.; If skin irritation or rash occurs: Get medical attention.

Storage: N/A

Disposal: Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Location
Main Plant - LA > Warehouse A > Building 2
Main Plant - LA > Warehouse B > Building 3
Main Plant - LA > Warehouse C > Building 5
Main Plant - NY > Control Center 1 > Unit 1 > Equipment 1
Main Plant - NY > Control Center 1 > Unit 1 > Equipment 2
Main Plant - NY > Control Center 2 > Unit 2
Main Plant - NY > Control Center 2 > Unit 5
Main Plant Corporate > Categories > Automotive
Ingredient CAS Number Weight %
Saccharin
81-07-2
1% - 5%
Silica, Amorphous, Fumed, Crystal-Free
112945-52-5
1% - 5%
Ethene, Homopolymer
9002-88-4
5% - 10%
Ethene, Tetrafluoro-, Homopolymer
9002-84-0
5% - 10%
Titanium Dioxide
13463-67-7
1% - 5%
Ethylene Glycol
107-21-1
0.1% - 1%
Epichlorohydrin-4,4'-Isopropylidene Diphenol Resin
25068-38-6
1% - 5%
Polyglycol Laurate
9004-81-3
10% - 20%
Cumene Hydroperoxide
80-15-9
0.1% - 1%
Cumene
98-82-8
0.1% - 1%


PPE Phrase:
Eye/Face Protection: Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists. Safety showers and eye wash stations should be available.
Skin Protection: Neoprene, Butyl-rubber, or nitrile-rubber gloves. Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.
Engineering Controls: Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.
Respiratory Protection: Use a NIOSH approved supplied air respirator with an organic cartridge if the potential to exceed established exposure limits exists. If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a NIOSH approved respirator must be used.