Product Summary Information
Product name
Jetweld LH-70
Signal Word

SDS ID
0012

Manufacturer
The Lincoln Electric Company
22801 St. Claire Avenue
Cleveland, OH
44117
U.S.A.

Manufacturer Phone
(216) 481-8100


GHS Hazard Categories
N/A


GHS Hazard Statements
N/A


GHS Precautionary Statements

Prevention: N/A

Response: N/A

Storage: N/A

Disposal: N/A

Location
Main Plant - LA
Main Plant - LA > Warehouse B > Building 3
Main Plant - NY > Control Center 1 > Unit 1
Main Plant - NY > Control Center 1 > Unit 2
Main Plant Corporate > Administration > Control Center 2 > Building 2
Main Plant Corporate > Categories > Automotive
Ingredient CAS Number Weight %
Iron
7439-89-6
50% - 100%
Iron Oxide
1309-37-1
0.1% - 1%
Silicon
7440-21-3
0.1% - 1%
Feldspars
68476-25-5
1% - 5%
Limestone
1317-65-3
5% - 10%
Silicon Dioxide (Amorphous)
7631-86-9
0.1% - 1%
Potassium Silicate
1312-76-1
1% - 5%
Sodium Silicate
1344-09-8
1% - 5%
Carboxymethyl Cellulose, Sodium Salt
9004-32-4
0.1% - 1%
Fluorides (as F)
16984-48-8
5% - 10%
Manganese
7439-96-5
1% - 5%
Quartz
14808-60-7
0.1% - 1%


PPE Phrase:
Appropriate Engineering Controls: Ventilation: Use enough ventilation, local exhaust at the arc, or both to keep the fumes and gases from the worker's breathing zone and the general area. Train the welder to keep his head out of the fumes. Keep exposure as low as possible.
Hand Protection: Wear protective gloves. Suitable gloves can be recommended by the glove supplier.
Hygiene Measures: Do not eat, drink or smoke when using the product. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Determine the composition and quantity of fumes and gases to which workers are exposed by taking an air sample from inside the welder's helmet if worn or in the worker's breathing zone. Improve ventilation if exposures are not below limits. See ANSI/AWS F1.1, F1.2, F1.3 and F1.5, available from the American Welding Society, www.aws.org.
Other: Protective Clothing: Wear hand, head, and body protection which help to prevent injury from radiation, sparks and electrical shock. See Z49.1. At a minimum this includes welder's gloves and a protective face shield, and may include arm protectors, aprons, hats, shoulder protection, as well as dark substantial clothing. Wear dry gloves free of holes or split seams. Train the welder not to permit electrically live parts or electrodes to contact skin . . . or clothing or gloves if they are wet. Insulate yourself from the work piece and ground using dry plywood, rubber mats or other dry insulation.
Eye/Face Protection: Wear helmet or use face shield with filter lens shade number 12 or darker for open arc processes or follow the recommendations as specified in ANSI Z49.1, Section 4, based on your process and settings. No specific lens shade recommendation for submerged arc or electroslag processes. Shield others by providing appropriate screens and flash goggles.
Respiratory Protection: Keep your head out of fumes. Use enough ventilation and local exhaust to keep fumes and gases from your breathing zone and the general area. An approved respirator should be used unless exposure assessments are below applicable exposure limits.