Product Summary Information
Product name
Clarity Synthetic Machine Oil 150, 220, 320, 460 (266172--266183)
Signal Word

SDS ID
0007

Manufacturer
Chevron Products Company
6001 Bollinger Canyon Rd
San Ramon, CA
94583
USA

Manufacturer Phone
(800) 424-9300


GHS Hazard Categories
N/A


GHS Hazard Statements
N/A


GHS Precautionary Statements

Prevention: N/A

Response: N/A

Storage: N/A

Disposal: N/A

Location
Main Plant - NY > Control Center 1 > Unit 1 > Equipment 1
Main Plant Corporate
Main Plant Corporate > Administration > Control Center 1 > Unit 2
Main Plant Corporate > Categories > Fuels
Ingredient CAS Number Weight %
Not Disclosed
Not Available
Unknown






PPE Phrase:
General Considerations: Consider the potential hazards of this material (see Section 2), applicable exposure limits, job activities, and other substances in the work place when designing engineering controls and selecting personal protective equipment. If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the personal protective equipment listed below is recommended. The user should read and understand all instructions and limitations supplied with the equipment since protection is usually provided for a limited time or under certain circumstances.
Occupational Exposure Limits: No applicable occupational exposure limits exist for this material or its components. Consult local authorities for appropriate values.
Skin Protection: No special protective clothing is normally required. Where splashing is possible, select protective clothing depending on operations conducted, physical requirements and other substances in the workplace. Suggested materials for protective gloves include: Nitrile Rubber, Silver Shield, Viton.
Eye/Face Protection: No special eye protection is normally required. Where splashing is possible, wear safety glasses with side shields as a good safety practice.
Engineering Controls: Use in a well-ventilated area.
Respiratory Protection: No respiratory protection is normally required. If user operations generate an oil mist, determine if airborne concentrations are below the occupational exposure limit for mineral oil mist. If not, wear an approved respirator that provides adequate protection from the measured concentrations of this material. For air-purifying respirators use a particulate cartridge. Use a positive pressure air-supplying respirator in circumstances where air-purifying respirators may not provide adequate protection.