Product Summary Information
Product name
KWS Iron Sulfate
Signal Word
Warning
SDS ID
0014

Manufacturer
KWS Distributing, LLC.
PO BOX 727
Dayton, OH
97114
USA

Manufacturer Phone
Contact Phone
     503-559-6972


GHS Hazard Categories
SKIN CORROSION/IRRITATION - Category 2
ACUTE TOXICITY - ORAL - Category 4
SERIOUS EYE DAMAGE /EYE IRRITATION - Category 2A


GHS Hazard Statements
Causes serious eye irritation
Causes skin irritation
Harmful if swallowed


GHS Precautionary Statements

Prevention: Wear protective gloves/eye protection/face protection; Do not eat, drink or smoke when using this product; Wash hands Thoroughly after handling.

Response: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.; If on skin: Wash with plenty of soap and water.; If skin irritation occurs: get medical attention.; If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; If eye irritation persists: Get medical advice/attention.

Storage: N/A

Disposal: Dispose of contents/container in accordance with local/regional/national regulations.

Location
Main Plant - LA > Warehouse A > Building 1
Main Plant - LA > Warehouse A > Building 2
Main Plant - LA > Warehouse C > Building 5
Main Plant - NY > Control Center 1 > Unit 1 > Equipment 1
Main Plant - NY > Control Center 1 > Unit 2
Main Plant Corporate > Administration > Control Center 1 > Unit 1
Main Plant Corporate > Administration > Control Center 1 > Unit 2
Ingredient CAS Number Weight %
Iron Sulfate
7720-78-7
60% - 100%


PPE:
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated.
Other skin protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Environmental exposure controls Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation
Appropriate engineering controls Good general ventilation should be sufficient to control worker exposure to airborne contaminants
Respiratory protection Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use
Eye/face protection Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles.
Body protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Hygiene measures Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.